華遠自動化系統有限公司 1
目 錄
HY—6210多功能定時/計數器板···············································································································································3
一 概述··········································································································································································3
二 性能及技術指標·······················································································································································3
2.1 性能·········································································································································································3
2.2 應用·········································································································································································3
2.3 技術指標·································································································································································3
2.4 物理尺寸及環境要求·············································································································································4
三 工作原理···································································································································································5
3.1 原理框圖·································································································································································5
3.2 原理概述·································································································································································5
四 主要元件位置圖 信號輸入/輸出插座及選擇開關 跳線定義··············································································6
4.1 主要元件位置圖·····················································································································································6
4.2 信號輸入/輸出插座················································································································································6
4.3 開關及跳線選擇·····················································································································································7
4.3.1 HY—6210板基地址選擇······································································································································7
4.3.2 定時/計數器的門控選擇·····································································································································8
4.3.3 定時/計數器1 2的時鐘選擇·····························································································································8
4.3.4 定時/計數器0的時鐘選擇···································································································································8
4.3.5 中斷請求信號電平選擇······································································································································9
4.3.6 中斷請求信號源選擇··········································································································································9
4.3.7 中斷請求允許信號選擇······································································································································9
4.3.8 中斷請求級別選擇··············································································································································9
五 寄存器描述及板內地址分配··································································································································11
5.1 可編程定時/計數器的操作方式··························································································································11
5.2 數字量輸出寄存器···············································································································································11
5.3 數字量輸入緩沖器···············································································································································11
5.4 定時/計數器內部門控寄存器······························································································································11
5.5 板內地址分配·······················································································································································11
六 安裝 拆除步驟·····················································································································································12
6.1 安裝步驟·······························································································································································12
6.2 拆除步驟·······························································································································································12
七 軟件編程·································································································································································13
7.1 可編程定時/計數器8253······································································································································13
7.2 8253在HY—6210中的應用·····································································································································3
7.3 可編程I/O接口8255················································································································································4
7.3.1 8255的編程選擇控制字······································································································································4
7.3.2 8255的工作方式說明··········································································································································6
7.4 8255在HY—6210中的應用·····································································································································7
7.5 編程舉例·································································································································································7
八 應用注意事項 ·····················································································································································12
8.1 注意事項·······························································································································································122 HY 6210多功能定時/計數板
8.2 HY—6210可連接的端子板···································································································································13
九 I/O地址分配····························································································································································13
附錄1 HY—6210測試軟件使用說明···························································································································13
附錄2 HY—6210驅動函數使用說明···························································································································18華遠自動化系統有限公司 3
HY 6210多功能定時/計數器板
一 概述
HY 6210板是IBM PC XT/AT總線兼容的可編程定時/計數和數字量輸入/輸出板 該板可直接插入IBM
PC XT/AT總線兼容計算機的任一擴展槽中使用 實現脈沖量計數 定時控制或現場開關量狀態監測及控制執行機
構工作等功能
HY 6210板上采用了一片8253定時/計數器和一片8255可編程數字量輸入/輸出芯片 為用戶提供了三個可編
程16位定時/計數器和24路可編程數字量輸入/輸出
在該板上8253的定時/計數器1和定時/計數器2被連接成同步計數 輸入時鐘可選擇板上時鐘或外部時鐘 定時
/計數器0可選擇接板上時鐘定時/計數 還可以選擇與定時/計數器1級連使用 三個定時/計數器均可選擇內部門控
或外部門控 定時/計數器的內部門控為8255的C口輸出 板上8255的A口和B口均給用戶作為16路數字量輸入或輸
出 8255的C口作為定時/計數器的內部門控和數字量輸入/輸出或中斷申請?jiān)试S控制
該板還提供了一路中斷請求申請信號 可選擇定時/計數器0的輸出或用戶數字量輸入或8255的C口輸出
HY 6210板的典型應用為數字量輸入/輸出 頻率測量 馬達控制信號發生器 事件計數等
二 性能及技術指標
2.1 性能
3路定時/計數器通道
24路可編程數字量輸入/輸出通道
1路中斷請求信號通道
2.2 應用
事件及頻率計數
周期及脈沖信號測量
可編程脈沖信號發生器
馬達控制
頻率發生器
開關量狀態監測
2.3 技術指標
定時器/計數器部分
定時/計數器通道 3路
定時/計數器長度 16位
內部時鐘頻率 2MHz
外部時鐘輸入頻率 0 ~ 2 MHz
定時/計數器輸出脈沖頻率 0.001Hz ~ 1MHz
占空比 0 ~ 100%
定時/計數器信號輸入/輸出電平特性
輸入高電平 VIH 2.0V
輸入高電平電流 I IH 20 A
輸入低電平 VIL 0.8V
輸入低電平電流 I IL 20 A4 HY 6210多功能定時/計數板
輸出高電平 VOH 2.4V
輸出高電平電流 IOH 400 A
輸出低電平 VOL 0.4V
輸出低電平電流 IOL 2.0mA
數字量部分
數字量輸入/輸出 24路 雙向可編程
數字量輸入/輸出頻率 0 ~ 1 MHz
中斷請求信號 1路
中斷請求信號有效電平 高 低電平可選
中斷級別 IRQ2 ~ 7可選擇
中斷允許 軟件控制
輸入/輸出信號及中斷請求信號電平特性
輸入高電平 VIH 2.0V
輸入高電平電流 I IH 40 A
輸入低電平 VIL 0.8V

您好！HY—6210多功能定時/計數板是一款專門設計用于控制和管理各種定時或計數任務的電子模塊。它可能具備以下特點： 1. **定時功能**：用戶可以設置時間段，讓設備在指定時間后自動執行特定操作，比如開關電源、啟動程序等。 2. **計數功能**：它可以累計計數器的增減，適用于需要追蹤循環次數或者記錄事件發生頻率的應用場景。 3. **編程接口**：通常配備數字或模擬輸入/輸出端口，方便與其他電子設備進行連接和數據交換。 4. **顯示界面**：可能帶有LCD顯示屏，以便實時查看設定的時間、計數值或工作狀態。 5. **操作簡單**：可能配有用戶友好的菜單系統，通過按鈕或軟件配置來調整參數。 6. **尺寸小巧**：適合集成到各種小型設備或控制系統中。 為了獲取更詳細的信息，建議您查閱該產品的具體說明書，其中會包含詳細的安裝步驟、使用方法、參數列表以及任何注意事項。如果在閱讀過程中遇到任何問題，歡迎隨時向我提問，我會盡力幫助您。