YOKOGAWA_DD馬達電機型錄
聲明:您必須遵守我們的協議,如果您下載了該資源行為將被視為對《電天下賬號管理規范》全部內容的認可,本網站資源來自原創,僅供用于學習和交流,請勿用于商業用途。如有侵權、不妥之處,請舉報本資源,我們將及時審核處理!
YOKOGAWA_DD馬達電機型錄.
文本預覽
DDM
Product Catalog
CA A501-E
Yokogawa Electric Corporation CA A501-E
2-9-32, Nakacho, Musashino-shi, Tokyo, 180 Japan ?Copyright Aug. 2005
Tel.: 81-422-52-1283 Fax.: 81-422-52-1284 2nd Edition Nov. 20052
The magnetic circuit of DYNASERV employs the
magnetic bias method, in which a rare-earth permanent
magnet with a high magnetic force is housed in the
stator core. As in the fig ure below, this mechanism
generates a high rotating torque, which is proportional
to the square value of the sum of the two magnetic
fl uxes. As a result, the direct drive (DD) motor offers an
unprecedented torque-weight ratio.
+60
+30
Stator core
Exciting coil 0
–30
Permanent magnet
(rare-earth)
–60
0° 90° 180° 270° 360°
?C Exciting
magnetic flux Rotational angle (degree)
T: rotating torque
Photodiode
?m bias magnetic flux Rotor core Stator Slit
Lens
LED
Cross Roller
bearing
Rotor Core
Intelligent Drivers are drastically improved the basic Stator Core
performance of DYNASERV. The employment of
digital positioning and speed control technologies and Coil
four-fold resolution are among the factors reducing the
Permanent magnet
position setting time conventional DYNASERV to less
than half that of DYNASERV.
Rotor
The standard-equipped feed forward function also
contributes to the reduction of the position setting time. DM1A-150
DYNASERV uses a special high-rigidity bearing to
support rotations, so it produces a very small amount
of dust. The cleanliness of DYNASERV
is proven by a Class-10 rating, which
means the maximum number of pieces
of dust whose particle diameter
exceeds 0.5 μm is 10 per square foot.
The gear-less structure ensures
the long product life.
All Rights Reserved. Copyright ? 2005, Yokogawa Electric Cor po ra tion CA A501-E 2005.08.31-00
ycarucca
gnittes
noitisoP
)ces-cra(
Sample (1)
Sample (2)
180
160 Existing drivers
140 DrvMII/GII driver
120 Position bandwidth: 30 Hz
Speed bandwidth: 120 Hz 100
80
60
40
20
0
1 10 100 1000
Face width of position setting pulses (number of pulses)
)sm(
emit
gnittes
noitisoP
Speed waveform
Travel time Position setting time
50
Tact time
30
10
0
0 0.3 0.5 0.8
Dust particles diameter (μm)
selcitrap
tsud
fo
rebmuN
)etunim·3tf/
selcitrap
tsud
fo
rebmun(
Features and Principles
High Torque Highly Accurate
DYNASERV is powered by a newly developed encoder,
to which the high resolution and accuracy of DM
Series drivers can be attributed. The resolution of
DM1A Series is 4,096,000 pulses per revolution. DM1B
series is 2,621,440 pulses per revolution. The absolute
Product Catalog
CA A501-E
Yokogawa Electric Corporation CA A501-E
2-9-32, Nakacho, Musashino-shi, Tokyo, 180 Japan ?Copyright Aug. 2005
Tel.: 81-422-52-1283 Fax.: 81-422-52-1284 2nd Edition Nov. 20052
The magnetic circuit of DYNASERV employs the
magnetic bias method, in which a rare-earth permanent
magnet with a high magnetic force is housed in the
stator core. As in the fig ure below, this mechanism
generates a high rotating torque, which is proportional
to the square value of the sum of the two magnetic
fl uxes. As a result, the direct drive (DD) motor offers an
unprecedented torque-weight ratio.
+60
+30
Stator core
Exciting coil 0
–30
Permanent magnet
(rare-earth)
–60
0° 90° 180° 270° 360°
?C Exciting
magnetic flux Rotational angle (degree)
T: rotating torque
Photodiode
?m bias magnetic flux Rotor core Stator Slit
Lens
LED
Cross Roller
bearing
Rotor Core
Intelligent Drivers are drastically improved the basic Stator Core
performance of DYNASERV. The employment of
digital positioning and speed control technologies and Coil
four-fold resolution are among the factors reducing the
Permanent magnet
position setting time conventional DYNASERV to less
than half that of DYNASERV.
Rotor
The standard-equipped feed forward function also
contributes to the reduction of the position setting time. DM1A-150
DYNASERV uses a special high-rigidity bearing to
support rotations, so it produces a very small amount
of dust. The cleanliness of DYNASERV
is proven by a Class-10 rating, which
means the maximum number of pieces
of dust whose particle diameter
exceeds 0.5 μm is 10 per square foot.
The gear-less structure ensures
the long product life.
All Rights Reserved. Copyright ? 2005, Yokogawa Electric Cor po ra tion CA A501-E 2005.08.31-00
ycarucca
gnittes
noitisoP
)ces-cra(
Sample (1)
Sample (2)
180
160 Existing drivers
140 DrvMII/GII driver
120 Position bandwidth: 30 Hz
Speed bandwidth: 120 Hz 100
80
60
40
20
0
1 10 100 1000
Face width of position setting pulses (number of pulses)
)sm(
emit
gnittes
noitisoP
Speed waveform
Travel time Position setting time
50
Tact time
30
10
0
0 0.3 0.5 0.8
Dust particles diameter (μm)
selcitrap
tsud
fo
rebmuN
)etunim·3tf/
selcitrap
tsud
fo
rebmun(
Features and Principles
High Torque Highly Accurate
DYNASERV is powered by a newly developed encoder,
to which the high resolution and accuracy of DM
Series drivers can be attributed. The resolution of
DM1A Series is 4,096,000 pulses per revolution. DM1B
series is 2,621,440 pulses per revolution. The absolute
AIGC
尊敬的用戶您好!"YOKOGAWA_DD馬達電機型錄"指的是由日本橫河電機株式會社(YOKOGAWA Electric Corporation)所生產的DD系列電動機型號目錄。DD系列通常指直流伺服電動機(Direct Drive Servo Motor),這種電機以其直接驅動負載、高精度控制和響應速度快等特點,在工業自動化、精密儀器、機器人等領域廣泛應用。型錄中詳細列出了該系列電動機的不同規格參數、性能指標、適用場景以及相關技術說明等信息,以便您在選擇或應用時參考和選型。如果您有關于YOKOGAWA/DD馬達電機的具體型號、技術問題或選型需求,請隨時向我們咨詢。
相關資源推薦