W
N E
FC22 Compression Load Cell
LLOOWW CCOOSSTT
CCoommpprreessssiioonn RRaannggeess:: 1100,, 2255,, 5500 aanndd 110000 LLbbff CCoommpprreessssiioonn
HHiigghh LLeevveell oorr MMiilllliivvoolltt OOuuttppuuttss
IInntteerrcchhaannggeeaabbllee
CCoommppaacctt EEaassyy ttoo FFiixxttuurree DDeessiiggnn
machined
DESCRIPTION silicon
piezoresistive
The FC22 Series low cost compression load cells strain gages
create new markets previously unrealizable due to cost fused with high
and performance constraints. This series provides a new temperature glass
level of performance at very low cost. Measurement to a high performance
Specialties’ proprietary MicrofusedTMtechnology, derived stainless steel substrate.
from demanding aerospace applications, employs micro- MicrofusedTMtechnology eliminates age-sensitive organic
epoxies used in traditional load cell designs providing
FEATURES excellent long term span and zero stability.
Operating at very low strains, MicrofusedTMtechnology
(cid:2) Low cost
provides gage factors greater than 100, an essentially
(cid:2) Small size unlimited cycle life expectancy, superior resolution,
(cid:2) Low noise exceedingly high over-range margins without the need
for stops and a ratiometric span of up to 4V. MicrofusedTM
(cid:2) Robust: high overrange capability
sensors are used in a variety of applications including
(cid:2) High reliability bathroom scales, paint sprayers and safety-critical
(cid:2) Low deflection automotive stability control.
(cid:2) Essentially unlimited cycle life Measurement Specialties’ model FC22 is appropriate for
expectancy use in all types of OEM weighing and force measurement
applications where high reliability and accuracy are
(cid:2) Low off center errors
critical. From appliance controls to biomechanical force
(cid:2) Fast response time feedback, FC22 is the OEM designer’s dream-come-true:
(cid:2) From 10 to 100 lbf ranges cost-optimized to bring your OEM products to life
whether you need thousands or millions of load cells
(cid:2) Reverse polarity protected
annually. Although the standard model is ideal for a wide
range of applications, the design team at our Load Cell
APPLICATIONS
Engineering Center can provide custom designs for your
(cid:2) Medical infusion pumps OEM applications. The FC22 is fully thermally
(cid:2) Robotics end-effectors compensated for changes in zero and span with respect
(cid:2) Variable force control to temperature and offer normalized zero and span for
interchangeability. Consult Measurement Specialties for
(cid:2) Load and compression sensing
uncompensated super low cost variants of the FC22 load
(cid:2) Exercise machines cell.
(cid:2) Pumps
(cid:2) Contact sensing
CE compliant per the following specifications:
(cid:2) Weighing
(cid:2) Household appliances IEC61000-4-2 [4 KV/4 KV (Air/Contact)]
IEC61000-4-3 (3 V/m)
IEC55022 Class A
Measurement Specialties, Inc. (cid:3)1000 Lucas Way Hampton, VA 23666 USA (cid:3)www.meas-spec.com (cid:3)757-766-1500 (cid:3)800-745-8008 (cid:3) Fax 757-766-4297
- 1 -FC22 Compression Load Cell
performance specifications
Standard Ranges: FC22 10, 25, 50, 100 Lbf Compression
Maximum over load 250% of range
Recommended Excitation Voltage (Amplified) 3.3 VDC to 5 VDC (1)
Recommended Excitation Voltage (Bridge Only) 5 VDC
Output Span (Amplified/Ratiometric) 0.5 to 4.5 V +/- 3% of Span at 5 VDC excitation
Full Scale Output Span (Bridge Only) FC22: 20 mV/V +/- 5%
Output at No Load (Zero output) +/-5% FSO (2)
Combined Non-linearity, Hysteresis and Nonrepeatability <+ /- 1% FSO
Long Term Stability (1 year) + /- 1% Span (Typical)
Temperature Compensation 0 - 50o C
Thermal Zero Shift <+/- 0.05%FSO/oC
Thermal Sensitivity Shift <+/- 0.05%/oC
Operating and Storage Temperature Range - 40o C to 85o C
Humidity 0 - 90% RH
Input Resistance (Bridge Only) 3K ohms (nominal)
Output Resistance (Bridge Only) 2.2K ohms (nominal)
Deflection at Rated Load < 0.05 mm
Isolation Resistance > 50 Mohms@ 250VDC
1) Higher excitation voltages available on request. 2) Lower trim values available on request (FSO: Full Scale Output)
dimensions
ordering information
Family Body Output Connection - Specials - Range Multiplier Units
Sample PN: FC 22 3 1 - 0000 - 0010 - L
1=20mV/VFSO 1= Cable output Reserved for none L=Lbf
FC22: Compression: 3=0.5-4.5VFSO@ custom
5 VDC input designs FC22: 10, 25, 50,
100 Lbf N = Newtons
Measurement Specialties, Inc. (cid:3)1000 Lucas Way Hampton, VA 23666 USA (cid:3)www.meas-spec.com (cid:3)757-766-1500 (cid:3)800-745-8008 (cid:3) Fax 757-766-4297
- 2 - FC22-1106

FC22是一款專業的微型力敏傳感器，它屬于壓力或力量傳感器的一種類型，具有結構緊湊、體積小、靈敏度高和測量范圍廣等特點。該傳感器通常采用先進的MEMS（微機電系統）技術制造，其主體部分可能包含一個彈性元件，如金屬膜片或硅晶圓，當受到作用力時，會改變其形狀或位移，進而引起傳感器內部敏感元件的電容、電阻或電壓等參數的變化，從而實現對力或壓力大小的精確轉換為電信號輸出。 具體到FC22型號，可能具有一致的壓力測量范圍，比如從0g至22g或者更大，適用于輕量化電子設備、機器人手臂、穿戴設備、工業自動化等領域中的力度檢測、物體抓取控制、人體姿態分析等多個場景。用戶可以根據具體應用需求選擇合適的量程、線性度、溫度穩定性等相關規格參數。