ELW壓力傳感器
聲明:您必須遵守我們的協議,如果您下載了該資源行為將被視為對《電天下賬號管理規范》全部內容的認可,本網站資源來自原創,僅供用于學習和交流,請勿用于商業用途。如有侵權、不妥之處,請舉報本資源,我們將及時審核處理!
ELW壓力傳感器
文本預覽
ELW Series Load Cells
Miniature - Low Profile Washer
ELW-B1, -B2, -B3 & -B4
(cid:216) 6.35 (0.25") Through hole
(cid:216) 4 (0.16") max. 610 (24") Teflon insulated leads
460 (18")
x 25 (1") nom. including module
(cid:216) 25.4 MODULE
(1")
Surface recessed on some ranges
(cid:216) 10.2 (0.4") x 0.5 (0.02") height above load cell body 12.7 ELW-B4
3.5 ELW-B1 (05 .2.5 2") ELW-B2 (07 .. 35 ") ELW-B3 (0.5")
(0.14")
5 to 200 Lb 500 Lb 1,000 Lb 2,000 Lb
25 to 1,000 N 2,500 N 5,000 N 10,000 N
PLEASE NOTE THE HIGH BUTTON STRESS FOR RANGES OF 500 LBS, 2500 N AND ABOVE
ELW-D1, -D2, -D3 & -D4
(cid:216) 6.35 (0.25") Through hole
(cid:216) 4 (0.16") max. 610 (24") Teflon insulated leads
460 (18")
x 25 (1") nom. including module
(cid:216) 25.4 MODULE
(1")
12.7 ELW-D4
8.6 ELW-D3 (0.5")
3.81 ELW-D1 (06 .. 23 55 ") ELW-D2 (0.34")
(0.15")
5 to 200 Lb 500 Lb 1,000 Lb 2,000 Lb
25 to 1,000 N 2,500 N 5,000 N 10,000 N
Dim: mm (inches)
ELW Series
Lb N OUTPUT
BODY RANGES RANGES OVERRANGE ”FSO”
STYLES ”FS” ”FS” LIMIT nom.
ELW-B1 & -D1 5 25 2x FS 250 mV
ELW-B1 & -D1 10 50 2x FS 250 mV
ELW-B1 & -D1 20 100 2x FS 250 mV
ELW-B1 & -D1 100 500 2x FS 250 mV
ELW-B1 & -D1 200 1000 2x FS 250 mV
ELW-B2 & -D2 500 2500 1.5x FS 250 mV
ELW-B3 & -D3 1000 5000 1.5x FS 250 mV
ELW-B4 & -D4 2000 10000 1.2x FS 250 mV
EXCITATION: 15VDC
IMPEDANCE IN: 2000 ?nom.
IMPEDANCE OUT: 1000 ?nom.
SENSING TECHNOLOGY: Semiconductor
NON-LINEARITY: –1%FSO
HYSTERESIS: –1%FSO
DEFLECTION AT “FS”: <0.013mm (<0.0005(cid:148)) nom.
THERMALZERO SHIFT: –2.5mV/50(cid:176)C (–2.5mV/100(cid:176)F)
THERMALSENSITIVITYSHIFT (TSS): –2.5%/50(cid:176)C (–2.5%/100(cid:176)F)
OPERATING TEMPERATURE: -40(cid:176)C to 120(cid:176)C (-40(cid:176)F to 250(cid:176)F)
COMPENSATED TEMPERATURE: 20(cid:176)C to 80(cid:176)C (70(cid:176)F to 170(cid:176)F)
ZERO OFFSET AT 20°C (70°F): –15mV typ.
MODE: Compression (+Signal Output for Compression)
CALIBRATION: Compression
”O(jiān)ff-the-Shelf” Stocking Program
Entran fi Entran Sensors & Electronics
ELW LOAD CELLS USA: Fairfield, NJ
UK: Garston, Watford, Herts, England
Miniature
Europe: Les Clayes-sous-Bois, France
Low Profile Washer
? SPECIFICATION ISSUE PAGE
www.entran.com ELWS0001U PA1 1 of 2
4-56ELW specifications continued ...
Options and Accessories:
COMPENSATED TEMPERATURE RANGES: STANDARD = 20°C to 80°C (70°F to 170°F)
Z1 = -20(cid:176)C to 40(cid:176)C (0(cid:176)F to 100(cid:176)F)
Z2 = 0(cid:176)C to 60(cid:176)C (32(cid:176)F to 140(cid:176)F)
Z4 = 40(cid:176)C to 90(cid:176)C (100(cid:176)F to 200(cid:176)F)
Z* = Non-standard, contact Entran
5 WIRE BRIDGE WIRING 5 = 5 Wire
FOR ADJUSTABLE ZERO OFFSET:
EXCITATION VOLTAGE: STANDARD = 15VDC
V00 = Replace (cid:148)00(cid:148) with Excitation between 1 and 15.
If less than 15, Sensitivity (FSO) will decrease
accordingly.
V* = Non-standard Excitation with standard FSO
and non-standard TSS, contact Entran
SPECIALLEAD LENGTH: L00F = Replace (cid:148)00(cid:148) with total length in feet.
L00M = Replace (cid:148)00(cid:148) with total length in meters.
SPECIALMODULE LOCATION: M00F = Replace (cid:148)00(cid:148) with distance between sensor
and module in feet.
M00M = Replace (cid:148)00(cid:148) with distance between sensor
and module in meters.
CONNECTOR WIRED TO LEADS: C = Microtech type male (w/o mate)
R = RJ Telephone type male (w/o mate)
RQ = Pins to mate with MM50 screw terminals
CUSTOM DIAMETERS: 0000I1 = Replace (cid:148)0000(cid:148) with outer diameter in inches.
0000I2 = Replace (cid:148)0000(cid:148) with inner diameter in inches.
0000M1 = Replace (cid:148)0000(cid:148) with outer diameter in millimeters.
0000M2 = Replace (cid:148)0000(cid:148) with inner diameter in millimeters.
MATING CONNECTORS FOR CONNECTOR OPTIONS: See Cable and Connector Bulletin
Model Number construction:
ELW - B1 - 100 N - /Z1/L2M/R
Series Bodies Range Units Options
B1 B2 (K used N=Newtons C, Ror RQ
B3 B4 for 1000 L=Pounds L00F or L00M
D1 D2 Ex.: 1K) M00F or M00M
Miniature - Low Profile Washer
ELW-B1, -B2, -B3 & -B4
(cid:216) 6.35 (0.25") Through hole
(cid:216) 4 (0.16") max. 610 (24") Teflon insulated leads
460 (18")
x 25 (1") nom. including module
(cid:216) 25.4 MODULE
(1")
Surface recessed on some ranges
(cid:216) 10.2 (0.4") x 0.5 (0.02") height above load cell body 12.7 ELW-B4
3.5 ELW-B1 (05 .2.5 2") ELW-B2 (07 .. 35 ") ELW-B3 (0.5")
(0.14")
5 to 200 Lb 500 Lb 1,000 Lb 2,000 Lb
25 to 1,000 N 2,500 N 5,000 N 10,000 N
PLEASE NOTE THE HIGH BUTTON STRESS FOR RANGES OF 500 LBS, 2500 N AND ABOVE
ELW-D1, -D2, -D3 & -D4
(cid:216) 6.35 (0.25") Through hole
(cid:216) 4 (0.16") max. 610 (24") Teflon insulated leads
460 (18")
x 25 (1") nom. including module
(cid:216) 25.4 MODULE
(1")
12.7 ELW-D4
8.6 ELW-D3 (0.5")
3.81 ELW-D1 (06 .. 23 55 ") ELW-D2 (0.34")
(0.15")
5 to 200 Lb 500 Lb 1,000 Lb 2,000 Lb
25 to 1,000 N 2,500 N 5,000 N 10,000 N
Dim: mm (inches)
ELW Series
Lb N OUTPUT
BODY RANGES RANGES OVERRANGE ”FSO”
STYLES ”FS” ”FS” LIMIT nom.
ELW-B1 & -D1 5 25 2x FS 250 mV
ELW-B1 & -D1 10 50 2x FS 250 mV
ELW-B1 & -D1 20 100 2x FS 250 mV
ELW-B1 & -D1 100 500 2x FS 250 mV
ELW-B1 & -D1 200 1000 2x FS 250 mV
ELW-B2 & -D2 500 2500 1.5x FS 250 mV
ELW-B3 & -D3 1000 5000 1.5x FS 250 mV
ELW-B4 & -D4 2000 10000 1.2x FS 250 mV
EXCITATION: 15VDC
IMPEDANCE IN: 2000 ?nom.
IMPEDANCE OUT: 1000 ?nom.
SENSING TECHNOLOGY: Semiconductor
NON-LINEARITY: –1%FSO
HYSTERESIS: –1%FSO
DEFLECTION AT “FS”: <0.013mm (<0.0005(cid:148)) nom.
THERMALZERO SHIFT: –2.5mV/50(cid:176)C (–2.5mV/100(cid:176)F)
THERMALSENSITIVITYSHIFT (TSS): –2.5%/50(cid:176)C (–2.5%/100(cid:176)F)
OPERATING TEMPERATURE: -40(cid:176)C to 120(cid:176)C (-40(cid:176)F to 250(cid:176)F)
COMPENSATED TEMPERATURE: 20(cid:176)C to 80(cid:176)C (70(cid:176)F to 170(cid:176)F)
ZERO OFFSET AT 20°C (70°F): –15mV typ.
MODE: Compression (+Signal Output for Compression)
CALIBRATION: Compression
”O(jiān)ff-the-Shelf” Stocking Program
Entran fi Entran Sensors & Electronics
ELW LOAD CELLS USA: Fairfield, NJ
UK: Garston, Watford, Herts, England
Miniature
Europe: Les Clayes-sous-Bois, France
Low Profile Washer
? SPECIFICATION ISSUE PAGE
www.entran.com ELWS0001U PA1 1 of 2
4-56ELW specifications continued ...
Options and Accessories:
COMPENSATED TEMPERATURE RANGES: STANDARD = 20°C to 80°C (70°F to 170°F)
Z1 = -20(cid:176)C to 40(cid:176)C (0(cid:176)F to 100(cid:176)F)
Z2 = 0(cid:176)C to 60(cid:176)C (32(cid:176)F to 140(cid:176)F)
Z4 = 40(cid:176)C to 90(cid:176)C (100(cid:176)F to 200(cid:176)F)
Z* = Non-standard, contact Entran
5 WIRE BRIDGE WIRING 5 = 5 Wire
FOR ADJUSTABLE ZERO OFFSET:
EXCITATION VOLTAGE: STANDARD = 15VDC
V00 = Replace (cid:148)00(cid:148) with Excitation between 1 and 15.
If less than 15, Sensitivity (FSO) will decrease
accordingly.
V* = Non-standard Excitation with standard FSO
and non-standard TSS, contact Entran
SPECIALLEAD LENGTH: L00F = Replace (cid:148)00(cid:148) with total length in feet.
L00M = Replace (cid:148)00(cid:148) with total length in meters.
SPECIALMODULE LOCATION: M00F = Replace (cid:148)00(cid:148) with distance between sensor
and module in feet.
M00M = Replace (cid:148)00(cid:148) with distance between sensor
and module in meters.
CONNECTOR WIRED TO LEADS: C = Microtech type male (w/o mate)
R = RJ Telephone type male (w/o mate)
RQ = Pins to mate with MM50 screw terminals
CUSTOM DIAMETERS: 0000I1 = Replace (cid:148)0000(cid:148) with outer diameter in inches.
0000I2 = Replace (cid:148)0000(cid:148) with inner diameter in inches.
0000M1 = Replace (cid:148)0000(cid:148) with outer diameter in millimeters.
0000M2 = Replace (cid:148)0000(cid:148) with inner diameter in millimeters.
MATING CONNECTORS FOR CONNECTOR OPTIONS: See Cable and Connector Bulletin
Model Number construction:
ELW - B1 - 100 N - /Z1/L2M/R
Series Bodies Range Units Options
B1 B2 (K used N=Newtons C, Ror RQ
B3 B4 for 1000 L=Pounds L00F or L00M
D1 D2 Ex.: 1K) M00F or M00M
AIGC
ELW壓力傳感器是一種專門用于測量和監測各類物理壓力參數的電子設備。該名稱"ELW"可能是特定品牌或制造商的縮寫,或者是某種技術或產品的型號。壓力傳感器工作原理是通過將感受到的壓力信號轉化為電信號輸出,這種電信號通常與施加在傳感器膜片上的壓力成比例關系,如壓阻效應、電容變化或是 piezoelectric(壓電)效應等。
ELW壓力傳感器可能應用廣泛,包括但不限于航空航天、汽車工業、石油鉆探、過程控制、醫療設備、智能家居等領域,用以確保系統安全運行、優化生產流程或提供準確的數據讀數。具體到實際使用時,用戶需要根據被測壓力范圍、精度要求以及工作環境等因素選擇合適的 ELW 壓力傳感器型號,并正確安裝和校準以獲取可靠的結果。
相關資源推薦