XX 熱電聯產新建工程項目高壓廠用電抗器技術規范書

XX 熱電聯產
新 建 工 程項 目
高壓廠用電抗器
技 術 規 范 書
編制：XX 電力工程公司
XXXX 年 X 月XX 熱電聯產
新 建工程 項 目
高壓廠用電抗器
技 術 規 范 書
批 準：
審 核：
編 制：目 錄
1 技術規范 ······················································································ 1
1.1 總則 ····················································································· 1
1.2 工程概況··············································································· 1
1.3 設計和運行條件 ····································································· 2
1.4 技術參數和性能要求 ······························································· 4
2 供貨范圍 ······················································································ 5
2.1 一般要求··············································································· 5
2.2 供貨范圍··············································································· 6
3 技術資料和交付進度 ······································································· 8
3.1 一般要求··············································································· 8
3.2 技術資料清單、進度和數量 ······················································ 8
4 交貨進度 ······················································································ 9
4.1 交貨進度說明 ········································································ 9
4.2 交貨進度清單 ········································································ 9
5 設備監造（檢驗）和性能驗收試驗 ····················································· 9
5.1 概述 ····················································································· 9
5.2 工廠檢驗··············································································· 9
5.3 性能驗收試驗 ······································································· 10
6 價格表 ························································································ 11
7 技術服務和設計聯絡 ······································································ 11
7.1 供方現場技術服務 ································································· 11
7.2 培訓 ···················································································· 13
7.3 設計聯絡·············································································· 14
8 分包商/外購部件情況 ····································································· 14
9 大（部）件情況 ············································································ 15
10 差異表 ························································································ 15XX熱電聯產新建工程項目 技術規范書
1 技術規范
1.1 總則
1.1.1 本設備技術規范書適用于XX熱電聯產新建工程（1×50MW 機組）2臺
高壓廠用電抗器，它提出了該設備的功能設計、結構、性能、安裝和試
驗等方面的技術要求。
1.1.2 設備的供方應已取得 ISO9001質量體系的有效證書，生產過或合作生產
過3套或以上同類額定值的設備，該設備應在與本規范書中規定條件相
同或較規定條件更為嚴格的條件下成功的商業運行三年以上。
1.1.3 本技術規范書所提及的要求和供貨范圍都是最低限度的要求，并未對一
切技術細節作出規定，也未充分地詳述有關標準和規范的條文，供方應
保證提供符合本技術規范書和工業標準的功能齊全的優質產品及其相
應服務。對國家有關安全、環保等強制性標準，必須滿足其要求。
1.1.4 供方應仔細閱讀包括本技術規范書在內的所有招標文件中闡述的全部
條款。如果供方?jīng)]有以書面形式對本規范書的條文提出異議，則意味著
供方提供的設備（或系統）完全符合本規范書的要求。如有異議，不管
是多么微小，都應在報價書中以“對規范書的意見和同規范書的差異”
為標題的專門章節中加以詳細描述。
1.1.5 供方須執行本技術規范書所列標準。當標準之間要求不一致時，應按要
求高的技術條款的標準執行。
1.1.6 若供方所提供的技術規范書前后有不一致的地方，應以更有利于設備安
裝運行、工程質量為原則，由需方確定。
1.1.7 在合同簽定后，需方有權因規范、標準、規程發生變化而提出一些補充
要求，在設備投料生產前，供方將在設計上給以修改。
1.1.8 本設備技術規范書經供、需雙方確認后作為訂貨合同的技術附件，與合
同正文具有同等的法律效力。
1.1.9 本設備技術規范書未盡事宜，由供需雙方通過談判商定。
1.2 工程概況
XX熱電聯產項目廠址地處XX區XX街道，位于XX區東南部，距XX城20
公里，距離XX市120 公里。XX街道是XX 區唯一的移民異地搬遷集鎮和XX區
XXXX電力工程有限公司 1XX熱電聯產新建工程項目 技術規范書
重點建設的四個中心城鎮、XX市重點建設的 45個中心鎮、103個經濟強鎮之一。
全鎮幅員面積 121.5 平方公里，轄 7 個行政村，59 個村民小組，一個社區,3 個居
民小組，總?cè)丝?1638人。耕地面積45821.1畝，森林面積93438畝，森林覆蓋率
46.8％。
鐵路橫貫全鎮，交通、區位優勢明顯。
所址位于XX。交通運輸條件十分方便。
1.3 設計和運行條件
1.3.1 水文氣象
本期項目地處XX市XX區內，XX區屬中亞熱帶濕潤季風氣候，其總的特點
是：四季分明，熱量充足，降水豐沛，季風影響突出；地勢由西北向東南升高，
氣溫遞降，降水遞增，立體氣候明顯。四季特點為春早，常有“倒春寒”和局部的風
雹災害；夏長，炎熱，旱澇交錯，伏旱頻繁；秋短，涼爽而多綿雨；冬遲，無嚴
寒，雨雪少，常有冬干。氣象資料
1.3.1.1 氣溫
年平均氣溫 18.4 ℃
最熱月平均氣溫 28.2 ℃
最冷月平均氣溫 5.6 ℃
極端最高氣溫 43 ℃
極端最低氣溫 -3.1 ℃
1.3.1.2 降雨、降雪量
歷年平均降雨量 1087.3mm
最大年降雨量 1145mm
最大月降雨量 235.5mm
最大積雪厚度 3cm
1.3.1.3 濕度
歷年平均相對濕度 79.0%
最熱月平均相對濕度 82%
最冷月平均相對濕度 75%
1.3.1.4 歷年平均氣壓 98.39kPa
XXXX電力工程有限公司 2XX熱電聯產新建工程項目 技術規范書
1.3.1.5 特殊氣象
常年平均霧日 68.3d