ELPM Series Load Cells
Precision Mini & Compact - Cross Stiff/High Stability
ELPM Series Bodies
ELPM-T1 ELPM-T2 ELPM-T3
5 to 10 Lbs 25 to 100 Lbs 250 to 1,000 Lbs
25 to 50 N 125 to 500 N 1,250 to 5,000 N
-T1E: 6-32 UNC -T2E: 10-32 UNF -T3E: 1/4-28 UNF
-T1M: M4 x 0.7 6.35 -T2M: M5 x 0.8 9.6 -T3M: M6 x 1
6.35 (0.25") (0.38")
3.2
(0.25") 1.27 (0.12") 0.76
(0.05") (0.03")
11.43 13.2 13.2
(0.45") (0.52") (0.52")
6.35 EXTERNAL 6.35 INTERNAL INTERNAL
(0.25") COMPENSATION (0.25") COMPENSATION 9.6 COMPENSATION
MODULE (0.38")
(cid:216) 19 (0.75") (cid:216) 25.4 (1")
(cid:216) 25.4 (1")
1.5 m (5ft) Shielded Cable
EXTERNAL COMPENSATION MODULE:(cid:31)
Spring Strain Relief
When needed, the ELPM-T1 has a tubular
on ELPM-T2 and ELPM-T3
stainless steel module approximately
Dim: mm (inches) 38 mm (1.5") in length, located 46 cm (18")
from the load cell.
ELPM Series
lb N OUTPUT
BODY RANGES RANGES OVERRANGE EXCITATION ”FSO”
TYPE ”FS” ”FS” LIMIT VDC nom.
ELPM-T1 –5 –25 1.5x FS 5 –2 mV/V
ELPM-T1 –10 –50 1.5x FS 5 –2 mV/V
ELPM-T2 ±25 ±125 1.5x FS 10 –2 mV/V
ELPM-T2 –50 –250 1.5x FS 10 –2 mV/V
ELPM-T2 ±100 ±500 1.5x FS 10 –2 mV/V
ELPM-T3 ±250 ±1250 1.5x FS 10 –2 mV/V
ELPM-T3 –500 –2500 1.5x FS 10 –2 mV/V
ELPM-T3 –1000 –5000 1.5x FS 10 –2 mV/V
BRIDGE IMPEDANCE: 350 ?
SENSING TECHNOLOGY: Metallic Foil
CROSS LOAD STIFFENERS: Internal
CROSS LOAD DAMAGE LIMIT: 1.3 x FS
DEFLECTION AT “FS”: 0.025 to 0.075mm (0.001 to 0.003(cid:148)) nom.
NON-LINEARITY: –0.15%FSO (–0.2%FSO for Ranges above 250lbs & 1250N)
HYSTERESIS: –0.15%FSO (–0.2%FSO for Ranges above 250lbs & 1250N)
THERMALZERO SHIFT: 0.01%FS/(cid:176)C (0.005%FS/(cid:176)F)
THERMALSENSITIVITYSHIFT (TSS): 0.01%FS/(cid:176)C (0.005%FS/(cid:176)F)
OPERATING TEMPERATURE: -50(cid:176)C to 120(cid:176)C (-65(cid:176)F to 250(cid:176)F)
COMPENSATED TEMPERATURE: 15(cid:176)C to 70(cid:176)C (60(cid:176)F to 160(cid:176)F)
ZERO OFFSET AT 20°C (70°F): –2%FSO typ.
MODE: +Signal Output for Tension
CALIBRATION: Tension (Optional Compression Calibration available)
ENVIRONMENTAL: Body: Waterproof Seal Lead Exit: Splashproof
”O(jiān)ff-the-Shelf” Stocking Program
Entran fi Entran Sensors & Electronics
ELPM LOAD CELLS USA: Fairfield, NJ
UK: Garston, Watford, Herts, England
Precision Miniature & Compact
Europe: Les Clayes-sous-Bois, France
High Stability - Cross Stiff
? SPECIFICATION ISSUE PAGE
www.entran.com ELPMS001U PB1 1 of 2
4-50ELPM specifications continued ...
Options and Accessories:
COMPENSATED TEMPERATURE RANGES: STANDARD = 15°C to 70°C (60°F to 160°F)
Z1 = -20(cid:176)C to 40(cid:176)C (0(cid:176)F to 100(cid:176)F)
Z2 = 0(cid:176)C to 60(cid:176)C (32(cid:176)F to 140(cid:176)F)
Z4 = 40(cid:176)C to 90(cid:176)C (100(cid:176)F to 200(cid:176)F)
Z* = Non-standard, contact Entran
EXCITATION VOLTAGE: V* = Non-standard Excitation, contact Entran
SPECIALLEAD LENGTH: L00F = Replace (cid:148)00(cid:148) with total length in feet.
L00M = Replace (cid:148)00(cid:148) with total length in meters.
SPECIALMODULE LOCATION: M00F = Replace (cid:148)00(cid:148) with distance between sensor
and module in feet.
M00M = Replace (cid:148)00(cid:148) with distance between sensor
and module in meters.
WATERPROOFING LEAD EXIT: X = Short term waterproofing. Limited to 105(cid:176)C (220(cid:176)F).
CONNECTOR WIRED TO LEADS: C = Microtech type male (w/o mate)
RS = RJ Telephone type male (w/o mate)
RQ = Pins to mate with MM50 screw terminals
WIRINGCOLORCODE: STANDARD Yellow or Green = + Output Signal
White = - Output Signal
W+ White = + Output Signal Alt. Color = - Output Signal
MATING CONNECTORS FOR CONNECTOR OPTIONS: See Cable and Connector Bulletin
MOUNTING SCREWS: STANDARD Tension
Available Tension & Compression calibration
Compression calibration
Model Number construction:
ELPM - T1 M - 25 N - /L2M/RS
Series Body Threads Range Units Options
T1 E = English (K used N=Newtons C, RSor RQ
T2 M = Metric for 1000 L=Pounds L00F or L00M
T3 Ex.: 1K) M00F or M00M
W+
X
Z1, Z2, Z4 or Z*
”O(jiān)ff-the-Shelf” Stocking Program
Mounting & Wiring:
LOAD CELL

ELPM拉力傳感器是一種專門用于測量物體受力情況的精密電子設備。它屬于力測量傳感器的一種，通過感知和轉換機械載荷（如張力、壓力或重力）為電信號輸出，來實時監控和記錄作用在物體上的拉伸或壓縮力。ELPM可能是某個特定品牌或系列的產品代號，其技術特點可能包括高精度、線性好、響應速度快、工作范圍寬以及抗干擾性強等。 這種傳感器通常應用于各種工業環境，例如航空、汽車制造、物流搬運、能源開采、金屬加工等領域中的張力控制、物料處理、安全監測等方面，幫助用戶實現對機械設備運行狀態的準確監控與預防性維護。具體到實際應用中，使用者可以根據需要配置相應的信號調理電路和數據采集系統，將傳感器的輸出信號轉化為可讀的數字信號，并進行進一步的數據分析與處理。