ELPS Series Load Cells
Precision Mini & Compact - Cross Stiff/High Output
ELPS Series Bodies
ELPS-T1 ELPS-T2 ELPS-T3
5 Lbs 10 to 50 Lbs 100 to 500 Lbs
25 N 50 to 250 N 500 to 2,500 N
-T2E: 10-32 UNF -T3E: 1/4-28 UNF
-T1E: 6-32 UNC -T2M: M5 x 0.8 -T3M: M6 x 1
-T1M: M4 x 0.7 6.35 9.6
6.35 (0.25") 3.2 (0.38")
(0.25") 1.27 (0.12") 0.76
(0.05") (0.03")
11.43 13.2 13.2
(0.45") (0.52") (0.52")
6.35 6.35
(0.25") (0.25") 9.6
(0.38")
(cid:216) 19 (0.75") (cid:216) 25.4 (1")
(cid:216) 25.4 (1")
WIRING
Spring Strain Relief (cid:216) 4 (0.16") nom.
on ELPS-T2 and ELPS-T3
MODULE
1.5 m (5ft) Shielded Cable
460 (18") 32 nom. (1.25")
1.5 m (5 ft)
Dim: mm (inches)
ELPS Series
lb N OUTPUT
BODY RANGES RANGES OVERRANGE EXCITATION ”FSO”
TYPE ”FS” ”FS” LIMIT VDC nom.
ELPS-T1 –5 –25 1.5x FS 10 –250 mV
ELPS-T2 –10 –50 1.5x FS 10 –250 mV
ELPS-T2 –20 –100 1.5x FS 10 –250 mV
ELPS-T2 –50 –250 1.5x FS 10 –250 mV
ELPS-T3 –100 –500 1.5x FS 10 –250 mV
ELPS-T3 –200 –1000 1.5x FS 10 –250 mV
ELPS-T3 –500 –2500 1.5x FS 10 –250 mV
INPUT IMPEDANCE: 1200 ?nom.
OUTPUT IMPEDANCE: 500 ?nom.
SENSING TECHNOLOGY: Semiconductor
CROSS LOAD STIFFENERS: Internal
CROSS LOAD DAMAGE LIMIT: 1.3 x FS
DEFLECTION AT “FS”: 0.025 to 0.075mm (0.001 to 0.003(cid:148)) nom.
NON-LINEARITY: –1/4%FSO (–1/2%FSO for Ranges above 200lbs & 1000N)
HYSTERESIS: –1/4%FSO (–1/2%FSO for Ranges above 200lbs & 1000N)
THERMALZERO SHIFT: –1%FSO/50(cid:176)C (–1%FSO/100(cid:176)F)
THERMALSENSITIVITYSHIFT (TSS): –2.5%/50(cid:176)C (–2.5%/100(cid:176)F)
OPERATING TEMPERATURE: -40(cid:176)C to 120(cid:176)C (-40(cid:176)F to 250(cid:176)F)
COMPENSATED TEMPERATURE: 20(cid:176)C to 80(cid:176)C (70(cid:176)F to 170(cid:176)F)
ZERO OFFSET AT 20°C (70°F): –15mV typ.
MODE: +Signal Output for Tension
CALIBRATION: Tension (Optional Compression Calibration available)
BODYMATERIAL: Stainless Steel
ENVIRONMENTAL: Body: Waterproof Seal Lead Exit: Splashproof
Entran fi Entran Sensors & Electronics
ELPS LOAD CELLS USA: Fairfield, NJ
UK: Garston, Watford, Herts, England
Precision Miniature & Compact
Europe: Les Clayes-sous-Bois, France
High Output - Cross Stiff
? SPECIFICATION ISSUE PAGE
www.entran.com ELPSS001U PB1 1 of 2
4-52ELPS specifications continued ...
Options and Accessories:
COMPENSATED TEMPERATURE RANGES: STANDARD = 20°C to 80°C (70°F to 170°F)
Z1 = -20(cid:176)C to 40(cid:176)C (0(cid:176)F to 100(cid:176)F)
Z2 = 0(cid:176)C to 60(cid:176)C (32(cid:176)F to 140(cid:176)F)
Z4 = 40(cid:176)C to 90(cid:176)C (100(cid:176)F to 200(cid:176)F)
Z* = Non-standard, contact Entran
5 WIRE BRIDGE WIRING 5 = 5 Wire
FOR ADJUSTABLE ZERO OFFSET:
EXCITATION VOLTAGE: STANDARD = 10VDC
V00 = Replace (cid:148)00(cid:148) with Excitation between 1 and 15.
If less than 10, Sensitivity (FSO) will decrease
accordingly.
V* = Non-standard Excitation with standard FSO
and non-standard TSS, contact Entran
SPECIALCABLE LENGTH: L00F = Replace (cid:148)00(cid:148) with total length in feet.
L00M = Replace (cid:148)00(cid:148) with total length in meters.
SPECIALMODULE LOCATION: M00F = Replace (cid:148)00(cid:148) with distance between sensor
and module in feet.
M00M = Replace (cid:148)00(cid:148) with distance between sensor
and module in meters.
WATERPROOFING CABLE EXIT: X = Short term waterproofing. Limited to 105(cid:176)C (220(cid:176)F).
CONNECTOR WIRED TO CABLE: C = Microtech type male (w/o mate)
RS = RJ Telephone type male (w/o mate)
RQ = Pins to mate with MM50 screw terminals
MATING CONNECTORS FOR CONNECTOR OPTIONS: See Cable and Connector Bulletin
CALIBRATION: STANDARD Tension
Available Tension & Compression calibration
Compression calibration
Model Number construction:
ELPS - T1 M - 25 N - /L2M/RS
Series Body Threads Range Units Options
T1 E = English (K used N=Newtons C, RS or RQ
T2 M = Metric for 1000 L=Pounds L00F or L00M
T3 Ex.: 1K) M00F or M00M
V1 to V10 or V*
X

您好！ELPS拉力傳感器是一種專門用于測量物體受力情況的電子設備。它通常應用于工業自動化、航空航天、汽車工程、運動設備等各種領域中，能夠?qū)崟r(shí)監測和記錄物體在拉伸或壓縮時產生的力矩。這種傳感器通常由敏感元件（如應變片或磁敏元件）構成，當外力作用時，這些元件會發生形變，進而轉換為電信號輸出，供數據處理系統分析。ELPS可能是某個特定品牌或型號的拉力傳感器，可能具有高精度、抗干擾性強、響應速度快等特點，以滿足不同應用環境下的需求。如果您有關于這款傳感器的詳細規格、使用方法或購買問題，請隨時告訴我，我會盡力提供幫助。